1. Apply Your Base

Start with your chosen base:
• Semi-Cured Gel Nail Wraps
• UV-Free Gel Nail Wraps
• Or any fully set base colour

Ensure your base is properly applied and cured (if required) before moving to the next step.

2. Tear Off the Required Amount

Curve & Create is a flexible paper-style tape, so you can easily tear it to size with your hands — no scissors needed.

Tear a piece slightly longer than the width of your nail so you have room to position and press it down securely.

3. Place the Tape

Position the tape where you want your line, arch, or tip to sit.

You can use it to create:
• Classic French tips
• Modern curved smile lines
• Clean negative space
• Graphic or angled edges

Take a moment to adjust placement before pressing down.

4. Press & Seal the Edges

This step is key for clean results.

Press the tape down firmly, especially along the edges where product could seep underneath.

You can use:
• Your fingertips
• Or the rubber tip of our Precision Tweezers (highly recommended for extra pressure and control)

Make sure the tape is fully sealed against the nail surface.

5. Apply Your Product

Using the tape as your guide, apply:
• White, Gold, or Silver Gel Liner, or
• Gloss or Matte Top Coat

If you’re painting over the tape, keep your nail angled slightly downward. This helps prevent product from running underneath the edge.

Apply thin, controlled layers for the cleanest result.

6. Remove the Tape Carefully

Before curing, gently peel the tape away slowly and steadily.

If needed, clean up any minor edges using:
• A cotton bud tip
• Or the rubber tip of your tweezers

Take your time — this is where the crisp lines reveal themselves.

7. You're Done!

Your la-bek semi-cured gel nails are set and ready to go.

• Keep hands dry for at least 2 hours after application
• If a strip gets damaged, swap it with a spare, each pack includes extras

Enjoy 💅